ISHTAKFLY ASH BRICKS · BY HABITAT X Get bricks →
Ishtak / How it's made

From ash to brick
in six steps

One line, one roof, one standard. Every Ishtak brick is weighed, mixed, pressed, cured and tested the same way.

Raw materials (illustration)ILLUSTRATION
01
Raw materials

Ash from power plants, not soil from farms

Fly ash is the fine ash left after coal is burnt in thermal power plants. We bring it in from plants in the region and blend it with stone dust or sand and a binder (cement, or lime with gypsum). Every material is weighed for each batch.

Main material
Fly ash, the largest share of the mix
Filler
Stone dust or sand
Binder
Cement, or lime with gypsum
Not used
Topsoil, coal or firewood
Mixing (illustration)ILLUSTRATION
02
Mixing

Weighed, then mixed with metered water

The materials go into a pan mixer with a measured quantity of water, so every batch has the same moisture and the same mix. Even mixing is what gives even strength.

Machine
Pan mixer
Control
Weighed batches, metered water
Why it matters
Same mix, same strength, every brick
Pressing (illustration)ILLUSTRATION
03
Pressing

Pressed in a steel mould to an exact size

A conveyor feeds the mix to a hydraulic press, which compacts it under high pressure in a steel mould. Every brick leaves the press the same size, with sharp edges and flat faces.

Machine
Hydraulic brick press
Result
Uniform size, sharp edges, flat faces
On site
Thinner mortar joints, less plaster
Curing (illustration)ILLUSTRATION
04
Curing

Water-cured, never fired

Fresh bricks rest on pallets and are then kept wet for days while the binder sets and gains strength. There is no kiln: no coal, no smoke, no burnt bricks.

Method
Water curing in the yard
Duration
Commonly 10 to 14 days (Odisha SPCB guideline)
Firing
None
Testing (illustration)ILLUSTRATION
05
Testing

Every batch tested before it leaves

Samples from each batch are tested for compressive strength, water absorption, size and efflorescence, following the methods referred to in IS 12894. Results go on a batch report.

Strength
Wet compressive strength test
Water
24-hour soak test
Paperwork
Batch report with every delivery
Dispatch (illustration)ILLUSTRATION
06
Dispatch

Stacked, strapped and delivered

Bricks are stacked on pallets and delivered to your site with the batch report, so your engineer can check what arrived.

Delivery
Tricity, Panchkula, Ambala, Derabassi and nearby
With it
Batch test report and GST invoice

Process as described in IS 12894:2002 requirements as summarised in the Odisha SPCB fly ash brick guideline and JK Cement fly ash brick guide (typical values). Exact mix and curing are set by our quality engineer and recorded per batch. Factory images are illustrations.

Want to see it in person?

Visits to our Barwala works can be arranged once production starts.

Ask for a visit →